Idea
In short
How do you build a fire detection with sprinkler demo?
A flame sensor and a temperature sensor start a small water pump and a siren in a model room, to show how fire sprinklers work. You need Arduino Uno R3, Flame sensor module (IR), DS18B20 Temperature Sensor, Resistor 4.7 kΩ, Relay Module 5V, Mini submersible water pump (3 to 6 V), Active buzzer 5 V, Battery holder 4 × AA with switch and AA alkaline battery × 4.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Combine two fire signals to reduce false triggers and drive a pump.
Parts list
- Development Boards
- Sensors
- Sensors
- Passives
- Interfaces
- Motors & Actuators
- Motors & Actuators
- Power
- Batteries
How to build it
- Build a model room from cardboard with a sprinkler nozzle
- Trigger when a flame is seen and the temperature rises 5 °C
- Run the pump and siren
- Keep running for 30 s after the flame is gone
- Test with a candle on a metal tray, with an adult
Common questions
What parts do I need for the fire detection with sprinkler demo?
Arduino Uno R3, Flame sensor module (IR), DS18B20 Temperature Sensor, Resistor 4.7 kΩ, Relay Module 5V, Mini submersible water pump (3 to 6 V), Active buzzer 5 V, Battery holder 4 × AA with switch and AA alkaline battery × 4.
How long does the fire detection with sprinkler demo take to build?
About 120 minutes for a intermediate maker.
