Components / Motors and drivers / Active buzzer 5 V

Active buzzer 5 V

Beeps when powered. No tone code needed.

TypeActive piezo or magnetic buzzer with built-in oscillator
Supply voltage3.5 to 5.5 V (5 V rated)
CurrentAbout 25 to 30 mA
Torque or outputAbout 85 dB at 10 cm, fixed tone near 2.3 kHz
Motors & ActuatorsReviewedMPN 12 mm 5 V active buzzerUsed in 135 projects
In short

What is the Active buzzer 5 V and what is it used for?

Beeps when powered. No tone code needed. Makers use it for alerts and feedback.

In the real world

Alarms, timers

How it works

An active buzzer has its own oscillator, so a HIGH pin makes a fixed tone.

Key specifications

Motor or actuator specValue
TypeActive piezo or magnetic buzzer with built-in oscillator
Supply voltage3.5 to 5.5 V (5 V rated)
CurrentAbout 25 to 30 mA
Torque or outputAbout 85 dB at 10 cm, fixed tone near 2.3 kHz
ControlOn/off: HIGH beeps
Watch out forAbove about 20 mA, drive it with a transistor rather than a pin

Pinout

+ (long leg)Positive, from the pin or the transistor
−Ground

How to use it

Tell active from passive by the sealed bottom and the + mark; an active buzzer beeps on plain DC. For tunes use a passive buzzer with tone().

void setup() { pinMode(8, OUTPUT); }
void loop() { digitalWrite(8, HIGH); delay(200); digitalWrite(8, LOW); delay(800); }

Applications

Buy at

Common questions

What is the Active buzzer 5 V used for?

In products: alarms, timers. In maker projects: alerts and feedback.

How does the Active buzzer 5 V work?

An active buzzer has its own oscillator, so a HIGH pin makes a fixed tone.

What voltage does the Active buzzer 5 V need?

3.5 to 5.5 V (5 V rated).