Flame sensor module (IR)
Infrared photodiode tuned to the light from flames.
What is the Flame sensor module (IR) and what is it used for?
Infrared photodiode tuned to the light from flames. Makers use it for fire-fighting robots, flame alarms.
A photodiode sensitive to 760 to 1100 nm infrared sees the strong IR emission of flames.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | IR at 760 to 1100 nm |
| Range | Up to about 1 m for a lighter flame |
| Interface | Digital threshold plus analog |
| Supply voltage | 3.3 to 5 V |
Pinout
How to use it
Point it towards the area to watch and set the trimmer so room light does not trigger it. Sunlight and halogen lamps also contain infrared and cause false alarms. It is a learning sensor, not a fire alarm.
Applications
Builds that use it
Alternatives
- MQ-2 gas and smoke sensor moduleDetects smoke rather than flame light
Common questions
What is the Flame sensor module (IR) used for?
In maker projects: fire-fighting robots, flame alarms.
How does the Flame sensor module (IR) work?
A photodiode sensitive to 760 to 1100 nm infrared sees the strong IR emission of flames.
What voltage does the Flame sensor module (IR) need?
3.3 to 5 V.
How do I connect the Flame sensor module (IR) to an Arduino or ESP32?
Digital threshold plus analog. Pins: AO (Analog IR level), GND (Ground), + (3.3 to 5 V), DO (Digital, changes when IR passes the threshold).
What can I use instead of the Flame sensor module (IR)?
MQ-2 gas and smoke sensor module.
