Idea
In short
How do you build an LPG leak shut-off with a servo valve?
When the gas sensor detects a leak, a servo turns the cylinder regulator knob off and an exhaust fan starts. You need Arduino Uno R3, MQ-5 LPG sensor module, MG996R metal gear servo, Relay Module 5V, Active buzzer 5 V and 5 V 2 A USB adapter.
- Level
- Advanced
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Make a fail-safe mechanical action from a sensor alarm.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Interfaces
- Motors & Actuators
- Power
How to build it
- Build a bracket that couples the servo to the regulator knob
- Warm up the MQ-5 and set a threshold from clean air
- On a leak, turn the valve off, sound the alarm and start the fan
- Require a button press to reset
- Test with the regulator off and the cylinder disconnected first
Common questions
What parts do I need for the LPG leak shut-off with a servo valve?
Arduino Uno R3, MQ-5 LPG sensor module, MG996R metal gear servo, Relay Module 5V, Active buzzer 5 V and 5 V 2 A USB adapter.
How long does the LPG leak shut-off with a servo valve take to build?
About 240 minutes for a advanced maker.
