Projects / Ideas / LPG leak alert by SMS and exhaust fan

LPG leak alert by SMS and exhaust fan

IntermediateSafetyIdeaReviewed
In short

How do you build an LPG leak alert by SMS and exhaust fan?

An MQ-6 sensor near the cylinder sends an SMS and starts an exhaust fan when it smells LPG. You need Arduino Uno R3, MQ-6 LPG sensor module, SIM A7670C 4G module, Relay Module 5V, Active buzzer 5 V, LM2596 Buck Module and 12 V 2 A DC adapter.

Level
Intermediate
Time
About 150 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Send alerts with a GSM module and drive a fan relay.

How to build it

  1. Warm up the MQ-6 and set the threshold from clean air
  2. Start the fan relay and buzzer on a leak
  3. Send one SMS per event to two numbers
  4. Repeat the SMS if it is still leaking after 10 minutes
  5. Keep the electronics away from the cylinder valve

Related projects

Common questions

What parts do I need for the LPG leak alert by SMS and exhaust fan?

Arduino Uno R3, MQ-6 LPG sensor module, SIM A7670C 4G module, Relay Module 5V, Active buzzer 5 V, LM2596 Buck Module and 12 V 2 A DC adapter.

How long does the LPG leak alert by SMS and exhaust fan take to build?

About 150 minutes for a intermediate maker.