Ceramic Capacitor 100 nF
Stores electrical charge and bypasses rapid changes in supply voltage.
What is the Ceramic Capacitor 100 nF and what is it used for?
Stores electrical charge and bypasses rapid changes in supply voltage. Makers use it for observe supply bypassing concepts.
Local IC supply decoupling
Passive components shape current, voltage, timing and filtering behavior. Selection depends on value, tolerance, power rating and construction.
Key specifications
| Passive component spec | Value |
|---|---|
| Value | 100 nF (0.1 µF) |
| Tolerance | ±10 % (X7R) or −20/+80 % (Y5V) |
| Voltage rating | 50 V typical |
| Package | Radial disc or MLCC, 2.54 or 5.08 mm lead spacing |
| Marking | "104" = 10 × 10⁴ pF |
Pinout
How to use it
Place one across the supply pins of every IC and module, as close to the pins as you can. It supplies the quick bursts of current the chip needs and keeps noise off the rail.
Applications
Builds that use it
DC motor speed and direction
Obstacle-avoiding robot
Frequency counter
Pocket logic probe
555 PWM motor speed controller
Shift register LED bar
Variable bench power supply with LM317
Op-amp inverting amplifier lab
Alternatives
- Electrolytic Capacitor 100 µFLarger bulk storage for motors and regulators
Common questions
What is the Ceramic Capacitor 100 nF used for?
In products: local IC supply decoupling. In maker projects: observe supply bypassing concepts.
How does the Ceramic Capacitor 100 nF work?
Passive components shape current, voltage, timing and filtering behavior. Selection depends on value, tolerance, power rating and construction.
What voltage does the Ceramic Capacitor 100 nF need?
50 V typical.
What can I use instead of the Ceramic Capacitor 100 nF?
Electrolytic Capacitor 100 µF.
