Projects / Ideas / Isolated serial bench

Isolated serial bench

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build an isolated serial bench?

A USB isolator keeps a computer and a board on separate grounds, so you see the difference when probing and when ground loops appear. You need USB isolator (ADuM3160), Arduino Nano, USB to TTL adapter (CH340G), Digital oscilloscope 2-channel 100 MHz and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 150 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Isolate a computer from a board.

How to build it

  1. Read the isolator limits
  2. Connect a board through it
  3. Probe with the scope
  4. Compare with a direct connection
  5. Note the noise difference

Related projects

Common questions

What parts do I need for the isolated serial bench?

USB isolator (ADuM3160), Arduino Nano, USB to TTL adapter (CH340G), Digital oscilloscope 2-channel 100 MHz and Breadboard 830 Tie Points.

How long does the isolated serial bench take to build?

About 150 minutes for a intermediate maker.