Components / Boards / Arduino Due

Arduino Due

32-bit Arduino with an 84 MHz ARM chip, two DACs and 3.3 V logic.

MicrocontrollerAT91SAM3X8E Cortex-M3
Clock84 MHz
Flash512 KB
RAM96 KB
Development BoardsReviewedMPN A000062Used in 1 project
ARDUINO
In short

What is the Arduino Due and what is it used for?

32-bit Arduino with an 84 MHz ARM chip, two DACs and 3.3 V logic. Makers use it for audio, fast control loops.

How it works

An 84 MHz Atmel SAM3X8E 32-bit ARM Cortex-M3 with DACs, CAN and native USB host.

Key specifications

Development board specValue
MicrocontrollerAT91SAM3X8E Cortex-M3
Clock84 MHz
Flash512 KB
RAM96 KB
Logic level3.3 V (not 5 V tolerant)
I/O pins54 digital, 12 analog, 2 DAC

Pinout

DAC0 DAC1True analog outputs
2021SDA SCL
SPI headerSPI
CANRX CANTXCAN (needs a transceiver)
01 / 19 18 / 17 16 / 15 14Four serial ports
Programming port and Native portTwo micro-USB ports

How to use it

Install Arduino SAM Boards and upload through the Programming port. All pins are 3.3 V, and 5 V on any pin will damage the chip, so check shields before fitting them.

Applications

Alternatives

Buy at

Common questions

What is the Arduino Due used for?

In maker projects: audio, fast control loops.

How does the Arduino Due work?

An 84 MHz Atmel SAM3X8E 32-bit ARM Cortex-M3 with DACs, CAN and native USB host.

What can I use instead of the Arduino Due?

Arduino GIGA R1 WiFi and Teensy 4.1.