Idea
In short
How do you build a motor and propeller thrust bench?
A load cell under a mounted motor measures thrust, current and power for different propellers, with a guard around it. Remove propellers whenever you are not testing. You need Arduino Nano, Brushless motor A2212 1000 KV, 30 A brushless ESC, Drone propellers 1045 (pair), Load cell 5 kg (bar type), HX711 load cell amplifier, INA219 Current Monitor and Fuse 5 A glass (5 × 20 mm).
- Level
- Advanced
- Time
- About 420 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure the thrust of a small motor.
Parts list
- Development Boards
- Motors & Actuators
- Motors & Actuators
- Motors & Actuators
- Sensors
- Sensors
- Sensors
- Passives
How to build it
- Mount the motor on a stand
- Add a guard and a strong clamp
- Run in steps
- Log thrust and current
- Compare propellers
Common questions
What parts do I need for the motor and propeller thrust bench?
Arduino Nano, Brushless motor A2212 1000 KV, 30 A brushless ESC, Drone propellers 1045 (pair), Load cell 5 kg (bar type), HX711 load cell amplifier, INA219 Current Monitor and Fuse 5 A glass (5 × 20 mm).
How long does the motor and propeller thrust bench take to build?
About 420 minutes for a advanced maker.
