HX711 load cell amplifier
24-bit ADC made for load cells. Pair it with a load cell for a weighing scale.
What is the HX711 load cell amplifier and what is it used for?
24-bit ADC made for load cells. Pair it with a load cell for a weighing scale. Makers use it for kitchen scales, beehive weight.
A low-noise amplifier and 24-bit ADC measure the tiny voltage change of the load cell's strain gauge bridge.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Bridge voltage from a load cell |
| Accuracy | 24-bit ADC, 10 or 80 samples a second |
| Interface | Two-wire serial (clock and data, not I2C) |
| Supply voltage | 2.6 to 5.5 V |
Pinout
How to use it
Wire the load cell to E+, E−, A+ and A−, and DT and SCK to any two digital pins. Use the HX711 library: tare with nothing on the scale, then calibrate with a known weight. Keep wires short and the cell mounted so force goes through it, not around it.
Applications
Builds that use it
Digital weighing scale
Digital hanging scale
Push-pull force gauge
Shop shelf stock monitor
Talking weighing scale
Lift overload alarm model
Beehive weight and temperature monitor
Water reminder for elderly
Alternatives
- ADS1115 16-bit ADC moduleGeneral-purpose ADC, but too coarse for load cells without an amplifier
Common questions
What is the HX711 load cell amplifier used for?
In maker projects: kitchen scales, beehive weight.
How does the HX711 load cell amplifier work?
A low-noise amplifier and 24-bit ADC measure the tiny voltage change of the load cell's strain gauge bridge.
What voltage does the HX711 load cell amplifier need?
2.6 to 5.5 V.
How do I connect the HX711 load cell amplifier to an Arduino or ESP32?
Two-wire serial (clock and data, not I2C). Pins: E+ and E− (Excitation to the load cell), A+ and A− (Load cell signal, channel A), B+ and B− (Second channel), GND (Ground), DT (Data out), SCK (Clock in).
What can I use instead of the HX711 load cell amplifier?
ADS1115 16-bit ADC module.
