30 A brushless ESC
Electronic speed controller for brushless motors.
TypeBrushless ESC
Supply voltage2S to 4S LiPo
Current30 A continuous
Control50 Hz servo PWM
Motors & ActuatorsReviewedMPN 30A ESC SimonK / BLHeliUsed in 9 projects
In short
What is the 30 A brushless ESC and what is it used for?
Electronic speed controller for brushless motors. Makers use it for drones, RC planes.
How it works
Six MOSFETs switch the three motor phases in sequence, timed from the motor's back-EMF.
Key specifications
| Motor or actuator spec | Value |
|---|---|
| Type | Brushless ESC |
| Supply voltage | 2S to 4S LiPo |
| Current | 30 A continuous |
| Control | 50 Hz servo PWM |
| Watch out for | Remove propellers when testing |
Pinout
Three motor wiresTo the motor
Red black thickBattery
Servo leadSignal, GND and BEC 5 V
How to use it
Send 1000 µs pulses at start-up so it arms, then 1000 to 2000 µs for throttle. Calibrate by powering on at full throttle and then dropping to minimum. Connect the BEC red wire only if it powers your receiver or board.
Applications
DronesRC planes
Builds that use it
Idea
Window-cleaning robot model
Idea
F450 quadcopter build
Idea
Single-axis PID tuning rig
Idea
RC car speed controller tester
Idea
Quadcopter build on an F450 frame
Idea
Motor thrust test stand
Idea
Wall-climbing robot with a suction fan
Idea
Motor and propeller thrust bench
Showing 8 of 9
Alternatives
- Brushless motor A2212 1000 KVMatching motor
Common questions
What is the 30 A brushless ESC used for?
In maker projects: drones, RC planes.
How does the 30 A brushless ESC work?
Six MOSFETs switch the three motor phases in sequence, timed from the motor's back-EMF.
What voltage does the 30 A brushless ESC need?
2S to 4S LiPo.
What can I use instead of the 30 A brushless ESC?
Brushless motor A2212 1000 KV.
