Projects / Ideas / Quadcopter build on an F450 frame

Quadcopter build on an F450 frame

AdvancedDrones & RCIdeaReviewed
In short

How do you build a quadcopter build on an F450 frame?

Build an F450 quadcopter with ready ESCs and a flight controller, learning motor direction, prop balance and LiPo safety before the first hover. You need Drone frame F450, Brushless motor A2212 1000 KV × 4, 30 A brushless ESC × 4, Drone propellers 1045 (pair) × 2, Li-Po 3S 11.1 V 2200 mAh 30C (drone), LiPo balance charger (IMAX B6 style), LiPo voltage checker (buzzer alarm), LiPo fireproof safety bag and XT60 connector pair.

Level
Advanced
Time
About 600 min
Parts
9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Understand thrust, ESC calibration and safe testing of a multirotor.

How to build it

  1. Assemble the frame and mount motors with the right spin directions
  2. Calibrate the ESCs one by one with props off
  3. Fit a flight controller (not in this parts list) and set it up in its configurator
  4. Balance the props
  5. Hover 50 cm above grass in an open area; check the rules for your area before flying

Related projects

Common questions

What parts do I need for the quadcopter build on an F450 frame?

Drone frame F450, Brushless motor A2212 1000 KV × 4, 30 A brushless ESC × 4, Drone propellers 1045 (pair) × 2, Li-Po 3S 11.1 V 2200 mAh 30C (drone), LiPo balance charger (IMAX B6 style), LiPo voltage checker (buzzer alarm), LiPo fireproof safety bag and XT60 connector pair.

How long does the quadcopter build on an F450 frame take to build?

About 600 minutes for a advanced maker.