Components / Sensors / Load cell 5 kg (bar type)

Load cell 5 kg (bar type)

Aluminium bar strain gauge for weighing up to 5 kg with an HX711.

MeasuresForce (weight)
Range0 to 5 kg
AccuracyAbout 0.05 % of full scale
Interface4-wire bridge (red E+, black E−, white A−, green A+ on most)
SensorsReviewedMPN Load cell 5kgUsed in 18 projects
+
In short

What is the Load cell 5 kg (bar type) and what is it used for?

Aluminium bar strain gauge for weighing up to 5 kg with an HX711. Makers use it for DIY weighing scale.

How it works

Strain gauges glued to the aluminium bar change resistance slightly as it bends, unbalancing a Wheatstone bridge.

Key specifications

Sensor specValue
MeasuresForce (weight)
Range0 to 5 kg
AccuracyAbout 0.05 % of full scale
Interface4-wire bridge (red E+, black E−, white A−, green A+ on most)
Supply voltage5 to 10 V excitation

Pinout

RedE+ excitation
BlackE− excitation
WhiteA− signal
GreenA+ signal

How to use it

Bolt one end to a base and the other to the platform so the arrow points in the direction of force. Connect to an HX711. Check the colours with a multimeter: the two excitation wires and the two signal wires each measure about 1 kΩ across.

Applications

Alternatives

Buy at

Common questions

What is the Load cell 5 kg (bar type) used for?

In maker projects: DIY weighing scale.

How does the Load cell 5 kg (bar type) work?

Strain gauges glued to the aluminium bar change resistance slightly as it bends, unbalancing a Wheatstone bridge.

What voltage does the Load cell 5 kg (bar type) need?

5 to 10 V excitation.

How do I connect the Load cell 5 kg (bar type) to an Arduino or ESP32?

4-wire bridge (red E+, black E−, white A−, green A+ on most). Pins: Red (E+ excitation), Black (E− excitation), White (A− signal), Green (A+ signal).

What can I use instead of the Load cell 5 kg (bar type)?

Load cell 1 kg and Load cell 20 kg.