Idea
In short
How do you build an ESC and servo pulse tester?
A potentiometer sets the pulse width sent to an ESC or servo for safe bench testing without a transmitter. You need Arduino Nano, Potentiometer 10 kΩ, SSD1306 OLED Display, Tactile push button 6 mm, 30 A brushless ESC, Brushless motor A2212 1000 KV and Fuse 5 A glass (5 × 20 mm).
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Generate RC pulses.
Parts list
- Development Boards
- Passives
- Displays
- Switches
- Motors & Actuators
- Motors & Actuators
- Passives
How to build it
- Generate 1 to 2 ms pulses
- Set the range with a knob
- Add an arming step
- Show the pulse width
- Keep propellers off while testing
Common questions
What parts do I need for the ESC and servo pulse tester?
Arduino Nano, Potentiometer 10 kΩ, SSD1306 OLED Display, Tactile push button 6 mm, 30 A brushless ESC, Brushless motor A2212 1000 KV and Fuse 5 A glass (5 × 20 mm).
How long does the ESC and servo pulse tester take to build?
About 210 minutes for a intermediate maker.
