Projects / Ideas / Linear slide with a stepper

Linear slide with a stepper

IntermediateMotionIdeaReviewed
In short

How do you build a linear slide with a stepper?

A stepper moves a carriage along a short rail and stops at two limit switches. You need Arduino Nano, A4988 stepper driver, NEMA 17 stepper motor, Limit switch (micro switch with lever), 12 V 2 A DC adapter and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 270 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Drive a stepper with a driver board.

How to build it

  1. Set the current limit
  2. Step and direction control
  3. Home with the limit switch
  4. Move to a set position
  5. Add acceleration

Related projects

Common questions

What parts do I need for the linear slide with a stepper?

Arduino Nano, A4988 stepper driver, NEMA 17 stepper motor, Limit switch (micro switch with lever), 12 V 2 A DC adapter and Breadboard 830 Tie Points.

How long does the linear slide with a stepper take to build?

About 270 minutes for a intermediate maker.