Idea
In short
How do you build a colour-sorting pick-and-place arm?
A conveyor brings blocks to a colour sensor and a servo arm drops each colour into its own bin. You need Arduino Uno R3, TCS34725 colour sensor, NEMA 17 stepper motor, A4988 stepper driver, MG996R metal gear servo × 2, SG90 Micro Servo, IR obstacle avoidance sensor module, 12 V 2 A DC adapter and LM2596 Buck Module.
- Level
- Advanced
- Time
- About 360 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Synchronise a conveyor, a sensor and an arm in a sequence.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Motor Drivers
- Motors & Actuators
- Motors & Actuators
- Sensors
- Power
- Power
How to build it
- Build a short belt conveyor driven by the stepper
- Stop the belt when the IR sensor sees a block
- Read the colour
- Pick it up with the arm and drop it in the right bin
- Restart the belt
Related projects
Common questions
What parts do I need for the colour-sorting pick-and-place arm?
Arduino Uno R3, TCS34725 colour sensor, NEMA 17 stepper motor, A4988 stepper driver, MG996R metal gear servo × 2, SG90 Micro Servo, IR obstacle avoidance sensor module, 12 V 2 A DC adapter and LM2596 Buck Module.
How long does the colour-sorting pick-and-place arm take to build?
About 360 minutes for a advanced maker.
