Projects / Ideas / Pocket USB power bank from 18650 cells

Pocket USB power bank from 18650 cells

IntermediatePowerIdeaReviewed
In short

How do you build a pocket USB power bank from 18650 cells?

A charger board and boost module turn a protected 18650 cell into a 5 V USB source for small gadgets. You need 18650 Li-ion cell, TP4056 module with protection (USB-C), MT3608 Boost Module, Battery holder 18650 single, USB A to micro-USB cable (data), Fuse 1 A glass (5 × 20 mm) and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Combine charging, protection and boosting.

How to build it

  1. Use a protected charger board
  2. Add a boost module set to 5.1 V
  3. Measure efficiency at 200 mA
  4. Add a fuse
  5. Label the polarity and never short the cell

Related projects

Common questions

What parts do I need for the pocket USB power bank from 18650 cells?

18650 Li-ion cell, TP4056 module with protection (USB-C), MT3608 Boost Module, Battery holder 18650 single, USB A to micro-USB cable (data), Fuse 1 A glass (5 × 20 mm) and Breadboard 830 Tie Points.

How long does the pocket USB power bank from 18650 cells take to build?

About 210 minutes for a intermediate maker.