Projects / Ideas / Reading lamp on a 18650

Reading lamp on a 18650

BeginnerPowerIdeaReviewed
In short

How do you build a reading lamp on a 18650?

An 18650 charger and boost board run a small white LED lamp on a protected cell with a switch. You need 18650 battery charger and boost (5 V / 1 A), 18650 Li-ion cell, Battery holder 18650 single, High-power LED 1 W white (star), Slide switch SPDT (SS12D00) and Heatsink TO-220.

Level
Beginner
Time
About 90 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Combine charge and boost modules.

How to build it

  1. Mount the cell and board
  2. Add a switch
  3. Add the LED with a series resistor
  4. Measure the LED current
  5. Check charge and discharge safely

Related projects

Common questions

What parts do I need for the reading lamp on a 18650?

18650 battery charger and boost (5 V / 1 A), 18650 Li-ion cell, Battery holder 18650 single, High-power LED 1 W white (star), Slide switch SPDT (SS12D00) and Heatsink TO-220.

How long does the reading lamp on a 18650 take to build?

About 90 minutes for a beginner maker.