Projects / Ideas / Single-cell boost power bank

Single-cell boost power bank

BeginnerPowerIdeaReviewed
In short

How do you build a single-cell boost power bank?

A boost module raises one Li-ion cell to 5 V for USB charging in a small case. You need MT3608 Boost Module, TP4056 module with protection (USB-C), 18650 cell 2600 mAh (branded), Battery holder 18650 single, USB-C Breakout Board and Breadboard 830 Tie Points.

Level
Beginner
Time
About 210 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Build a basic power bank and check it.

How to build it

  1. Read the charger and boost notes
  2. Wire the protected charger
  3. Wire the boost to 5 V
  4. Measure the output
  5. Check the battery protection

Related projects

Common questions

What parts do I need for the single-cell boost power bank?

MT3608 Boost Module, TP4056 module with protection (USB-C), 18650 cell 2600 mAh (branded), Battery holder 18650 single, USB-C Breakout Board and Breadboard 830 Tie Points.

How long does the single-cell boost power bank take to build?

About 210 minutes for a beginner maker.