Idea
In short
How do you build a DIY power bank with an IP5306?
An IP5306 board with one 18650 cell makes a small power bank with a charge indicator. You need IP5306 power bank IC, 18650 Li-ion cell, Battery holder 18650 single, USB-A female breakout and ABS project box (100 × 60 × 25 mm).
- Level
- Intermediate
- Time
- About 90 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build and understand a power bank.
Parts list
- Power
- Power
- Power
- Connectors
- Mechanical & Hardware
How to build it
- Wire the cell holder to the board
- Check polarity
- Fit it in a box
- Test charging and discharging
- Measure the capacity
Common questions
What parts do I need for the DIY power bank with an IP5306?
IP5306 power bank IC, 18650 Li-ion cell, Battery holder 18650 single, USB-A female breakout and ABS project box (100 × 60 × 25 mm).
How long does the DIY power bank with an IP5306 take to build?
About 90 minutes for a intermediate maker.
