Fuse 1 A glass (5 × 20 mm)
Fast-blow glass fuse for protecting supplies.
Value1 A fast-blow
Power rating250 V AC rating
Package5 × 20 mm glass
MarkingF1AL250V
PassivesReviewedMPN 5x20 1A fastUsed in 20 projects
In short
What is the Fuse 1 A glass (5 × 20 mm) and what is it used for?
Fast-blow glass fuse for protecting supplies. Makers use it for fusing adapters and mains-side circuits.
How it works
A thin wire melts and opens the circuit when current stays above the rating.
Key specifications
| Passive component spec | Value |
|---|---|
| Value | 1 A fast-blow |
| Power rating | 250 V AC rating |
| Package | 5 × 20 mm glass |
| Marking | F1AL250V |
Pinout
End capsFit a 5 × 20 mm holder
How to use it
Put it in the live wire right after the input. F means fast-blow. Use a T (slow-blow) fuse for motors and transformers that draw a surge at switch-on. Replace only with the same rating.
Applications
Fusing adapters and mains-side circuits
Builds that use it
Guided build
Engine temperature alarm
Guided build
Engine hour meter for pumps and tractors
Guided build
Fuse and polyfuse lab
Guided build
Automatic fading night light
Idea
Bench supply from a 12 V SMPS
Idea
Grow light timer
Idea
Mini adjustable bench supply
Idea
Pocket USB power bank from 18650 cells
Showing 8 of 20
Alternatives
- Polyfuse (PTC resettable) 500 mAResets itself
- Fuse 5 A glass (5 × 20 mm)Higher rating
Common questions
What is the Fuse 1 A glass (5 × 20 mm) used for?
In maker projects: fusing adapters and mains-side circuits.
How does the Fuse 1 A glass (5 × 20 mm) work?
A thin wire melts and opens the circuit when current stays above the rating.
What can I use instead of the Fuse 1 A glass (5 × 20 mm)?
Polyfuse (PTC resettable) 500 mA and Fuse 5 A glass (5 × 20 mm).
