18650 battery charger and boost (5 V / 1 A)
Charges one Li-ion cell and boosts it to 5 V USB, like a power bank board.
FunctionCharger + boost
Input voltage5 V USB
Output voltage5 V
Output currentUp to 2.1 A
PowerReviewedMPN IP5306 moduleUsed in 3 projects
In short
What is the 18650 battery charger and boost (5 V / 1 A) and what is it used for?
Charges one Li-ion cell and boosts it to 5 V USB, like a power bank board. Makers use it for DIY power banks.
How it works
The IP5306 charges the cell and boosts its voltage to 5 V.
Key specifications
| Power module spec | Value |
|---|---|
| Function | Charger + boost |
| Input voltage | 5 V USB |
| Output voltage | 5 V |
| Output current | Up to 2.1 A |
| Protection | Over-charge, over-discharge, short-circuit |
Pinout
USB inputCharging
B+ and B−Battery
USB output or OUT pads5 V output
How to use it
Turns one 18650 cell into a power bank for a project. Many boards switch off when the load is very small; add a dummy load or pick a version with always-on.
Applications
DIY power banks
Builds that use it
Alternatives
- TP4056 module with protection (USB-C)Charger only
Common questions
What is the 18650 battery charger and boost (5 V / 1 A) used for?
In maker projects: DIY power banks.
How does the 18650 battery charger and boost (5 V / 1 A) work?
The IP5306 charges the cell and boosts its voltage to 5 V.
What voltage does the 18650 battery charger and boost (5 V / 1 A) need?
5 V USB.
What can I use instead of the 18650 battery charger and boost (5 V / 1 A)?
TP4056 module with protection (USB-C).
