Components / Wireless / RFM95W LoRa module (868 MHz)

RFM95W LoRa module (868 MHz)

SX1276-based LoRa module for the 865 to 868 MHz band.

RadioLoRa / FSK
Band868 MHz (tune for IN865)
Typical rangeSeveral km
InterfaceSPI
WirelessReviewedMPN RFM95W-868S2Used in 9 projects
RFM95W
In short

What is the RFM95W LoRa module (868 MHz) and what is it used for?

SX1276-based LoRa module for the 865 to 868 MHz band. Makers use it for loRaWAN nodes in India.

How it works

A HopeRF module built on the Semtech SX1276 LoRa transceiver.

Key specifications

Wireless module specValue
RadioLoRa / FSK
Band868 MHz (tune for IN865)
Typical rangeSeveral km
InterfaceSPI
Supply voltage3.3 V

Pinout

3.3V3.3 V only
GNDGround
NSSSPI chip select
SCK MOSI MISOSPI
RESETReset
DIO0TX and RX done
DIO1Needed for LoRaWAN
ANTAntenna pad

How to use it

Set the frequency inside 865 to 867 MHz for India. For LoRaWAN use MCCI LMIC or RadioLib with the IN865 region and wire DIO1 as well. Solder an 8.2 cm wire or an 868 MHz antenna to ANT.

Applications

Alternatives

Buy at

Common questions

What is the RFM95W LoRa module (868 MHz) used for?

In maker projects: loRaWAN nodes in India.

How does the RFM95W LoRa module (868 MHz) work?

A HopeRF module built on the Semtech SX1276 LoRa transceiver.

What voltage does the RFM95W LoRa module (868 MHz) need?

3.3 V.

How do I connect the RFM95W LoRa module (868 MHz) to an Arduino or ESP32?

SPI. Pins: 3.3V (3.3 V only), GND (Ground), NSS (SPI chip select), SCK MOSI MISO (SPI), RESET (Reset), DIO0 (TX and RX done).

What can I use instead of the RFM95W LoRa module (868 MHz)?

LoRa SX1278 Ra-02 module (433 MHz) and RAK3172 LoRaWAN module.