Projects / Ideas / Smoke early warning for a forest edge

Smoke early warning for a forest edge

AdvancedSafetyIdeaReviewed
In short

How do you build a smoke early warning for a forest edge?

A solar LoRa node with a smoke sensor and a flame sensor sits at a farm or forest edge and alerts the village when smoke rises. You need ESP32 DevKit V1, MQ-2 gas and smoke sensor module, Flame sensor module (IR), RFM95W LoRa module (868 MHz), 868 MHz LoRa antenna, Solar panel 12 V 10 W, PWM solar charge controller 10 A, 12 V 7 Ah sealed lead acid battery, LM2596 Buck Module and Waterproof enclosure IP65 (junction box).

Level
Advanced
Time
About 360 min
Parts
10
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Combine two weak signals into a confident alarm and send it over a long-range link.

How to build it

  1. Size the panel and lead-acid battery for the MQ-2 heater's 150 mA all day
  2. Read both sensors and need both to agree for an alarm
  3. Send a heartbeat every hour and an alarm at once
  4. Mount 2 m high facing the fire-prone side
  5. Test the range to the receiver before the dry season

Related projects

Common questions

What parts do I need for the smoke early warning for a forest edge?

ESP32 DevKit V1, MQ-2 gas and smoke sensor module, Flame sensor module (IR), RFM95W LoRa module (868 MHz), 868 MHz LoRa antenna, Solar panel 12 V 10 W, PWM solar charge controller 10 A, 12 V 7 Ah sealed lead acid battery, LM2596 Buck Module and Waterproof enclosure IP65 (junction box).

How long does the smoke early warning for a forest edge take to build?

About 360 minutes for a advanced maker.