Projects / Ideas / Pocket LoRa ping tool

Pocket LoRa ping tool

IntermediateCommunicationIdeaReviewed
In short

How do you build a pocket LoRa ping tool?

A small RFM95W radio with a screen pings another node and shows signal strength, for checking where a node can be placed. You need ESP32 DevKit V1, RFM95W LoRa module (868 MHz), SSD1306 OLED Display, Tactile push button 6 mm, 868 MHz LoRa antenna, 18650 cell 2600 mAh (branded), Battery holder 18650 single and TP4056 module with protection (USB-C).

Level
Intermediate
Time
About 180 min
Parts
8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Make a field tool to test radio coverage.

How to build it

  1. Wire the radio over SPI
  2. Send a ping on a button press
  3. Show the reply RSSI and SNR
  4. Store the best reading
  5. Walk the field and map it

Related projects

Common questions

What parts do I need for the pocket LoRa ping tool?

ESP32 DevKit V1, RFM95W LoRa module (868 MHz), SSD1306 OLED Display, Tactile push button 6 mm, 868 MHz LoRa antenna, 18650 cell 2600 mAh (branded), Battery holder 18650 single and TP4056 module with protection (USB-C).

How long does the pocket LoRa ping tool take to build?

About 180 minutes for a intermediate maker.