pH sensor kit (analog)
pH probe with an amplifier board. Needs calibration with buffer solutions.
What is the pH sensor kit (analog) and what is it used for?
pH probe with an amplifier board. Needs calibration with buffer solutions. Makers use it for hydroponics, water testing.
A glass electrode produces a small voltage that changes by about 59 mV per pH unit at 25 °C; the board amplifies and offsets it.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | pH |
| Range | 0 to 14 |
| Accuracy | About ±0.1 pH after calibration |
| Interface | Analog |
| Supply voltage | 5 V |
| Watch out for | Keep the probe tip wet in storage solution |
Pinout
How to use it
Calibrate with pH 7 and pH 4 buffer solutions: adjust the offset trimmer at pH 7, then compute the slope from pH 4. Rinse the probe in distilled water between solutions and never let the glass bulb dry out.
Applications
Builds that use it
Aquaponics fish tank monitor
Drinking water TDS and pH meter
Hydroponic nutrient and pH doser
Pond oxygen and temperature logger
Water quality buoy
Handheld soil probe
Hydroponic pH monitor
Aquarium pH monitor
Alternatives
- TDS sensor moduleDissolved solids instead of acidity
Common questions
What is the pH sensor kit (analog) used for?
In maker projects: hydroponics, water testing.
How does the pH sensor kit (analog) work?
A glass electrode produces a small voltage that changes by about 59 mV per pH unit at 25 °C; the board amplifies and offsets it.
What voltage does the pH sensor kit (analog) need?
5 V.
How do I connect the pH sensor kit (analog) to an Arduino or ESP32?
Analog. Pins: V+ (5 V), G (Ground), Po (Analog pH output), Do (Digital threshold), To (Temperature output (some boards)), BNC (pH probe connector).
What can I use instead of the pH sensor kit (analog)?
TDS sensor module.
