Idea
In short
How do you build a pond oxygen and temperature logger?
A logger helps decide when to run aerators, using temperature, pH and a dissolved oxygen probe. You need ESP32 DevKit V1, pH sensor kit (analog), DS18B20 waterproof probe, MicroSD Card Module, SanDisk microSD card 32 GB (A1, Class 10), DS3231 RTC module and Waterproof enclosure IP65 (junction box).
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Log water quality.
Parts list
- Development Boards
- Sensors
- Sensors
- Interfaces
- SBC Accessories
- Sensors
- Mechanical & Hardware
How to build it
- Read pH and temperature
- Add a DO probe if available
- Log every 10 minutes
- Run the aerator at low DO
- Calibrate pH often
Common questions
What parts do I need for the pond oxygen and temperature logger?
ESP32 DevKit V1, pH sensor kit (analog), DS18B20 waterproof probe, MicroSD Card Module, SanDisk microSD card 32 GB (A1, Class 10), DS3231 RTC module and Waterproof enclosure IP65 (junction box).
How long does the pond oxygen and temperature logger take to build?
About 240 minutes for a intermediate maker.
