Idea
In short
How do you build an aquarium pH monitor?
A pH probe board shows the acidity of tank water, calibrated with buffer solutions. You need Arduino Nano, pH sensor kit (analog), DS18B20 waterproof probe, Resistor 4.7 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 300 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Calibrate a pH probe properly.
Parts list
- Development Boards
- Sensors
- Sensors
- Passives
- Displays
- Prototyping
How to build it
- Calibrate with two buffer solutions
- Read the probe
- Add temperature compensation
- Show pH
- Log a day of values
Common questions
What parts do I need for the aquarium pH monitor?
Arduino Nano, pH sensor kit (analog), DS18B20 waterproof probe, Resistor 4.7 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the aquarium pH monitor take to build?
About 300 minutes for a advanced maker.
