TDS sensor module
Measures total dissolved solids in water.
MeasuresTDS
Range0 to 1000 ppm
Accuracy±10 % full scale
InterfaceAnalog
SensorsReviewedMPN TDS meter v1.0Used in 5 projects
In short
What is the TDS sensor module and what is it used for?
Measures total dissolved solids in water. Makers use it for drinking water and hydroponics.
How it works
AC excitation measures the water's conductivity, which rises with dissolved salts.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | TDS |
| Range | 0 to 1000 ppm |
| Accuracy | ±10 % full scale |
| Interface | Analog |
| Supply voltage | 3.3 to 5.5 V |
Pinout
+3.3 to 5.5 V
−Ground
AAnalog output
ProbeTwo-pin probe connector
How to use it
Use the DFRobot GravityTDS method with temperature compensation (a DS18B20 in the same water). Do not power it in the same water as a pH probe at the same time, as they interfere.
Applications
Drinking water and hydroponics
Builds that use it
Alternatives
- pH sensor kit (analog)Measures acidity
Common questions
What is the TDS sensor module used for?
In maker projects: drinking water and hydroponics.
How does the TDS sensor module work?
AC excitation measures the water's conductivity, which rises with dissolved salts.
What voltage does the TDS sensor module need?
3.3 to 5.5 V.
How do I connect the TDS sensor module to an Arduino or ESP32?
Analog. Pins: + (3.3 to 5.5 V), − (Ground), A (Analog output), Probe (Two-pin probe connector).
What can I use instead of the TDS sensor module?
pH sensor kit (analog).
