Idea
In short
How do you build a handheld soil probe?
A probe with moisture, temperature and pH that shows readings on a small display for field use. You need ESP32 DevKit V1, SHT20 soil temperature and humidity probe, pH sensor kit (analog), SSD1306 OLED Display, Li-Po battery 3.7 V 2000 mAh and Tactile push button 6 mm.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Combine several soil sensors.
Parts list
- Development Boards
- Sensors
- Sensors
- Displays
- Batteries
- Switches
How to build it
- Read each sensor
- Calibrate pH with buffer solutions
- Average and show
- Save a reading with a button
- Rinse the probe between uses
Common questions
What parts do I need for the handheld soil probe?
ESP32 DevKit V1, SHT20 soil temperature and humidity probe, pH sensor kit (analog), SSD1306 OLED Display, Li-Po battery 3.7 V 2000 mAh and Tactile push button 6 mm.
How long does the handheld soil probe take to build?
About 180 minutes for a intermediate maker.
