Idea
In short
How do you build a hydroponic pH monitor?
A pH probe in a nutrient tank shows the pH on a screen and logs it, with two-point calibration using buffer solutions. You need ESP32 DevKit V1, pH sensor kit (analog), ADS1115 ADC IC, SSD1306 OLED Display and MicroSD Card Module.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Calibrate a pH probe and read it reliably.
Parts list
- Development Boards
- Sensors
- Integrated Circuits
- Displays
- Interfaces
How to build it
- Read the probe through a 16-bit ADC
- Calibrate with pH 4 and pH 7 buffer
- Fit a line to convert volts to pH
- Keep the probe wet in storage solution
- Log and plot the drift
Common questions
What parts do I need for the hydroponic pH monitor?
ESP32 DevKit V1, pH sensor kit (analog), ADS1115 ADC IC, SSD1306 OLED Display and MicroSD Card Module.
How long does the hydroponic pH monitor take to build?
About 150 minutes for a intermediate maker.
