Projects / Ideas / Water quality buoy

Water quality buoy

AdvancedEnvironmentIdeaReviewed
In short

How do you build a water quality buoy?

A solar buoy measures pH, TDS, turbidity and temperature and sends data by LoRa. You need Heltec WiFi LoRa 32 V3, pH sensor kit (analog), TDS sensor module, Turbidity sensor module, DS18B20 waterproof probe, Solar panel 6 V 1 W and CN3065 solar Li-ion charger module.

Level
Advanced
Time
About 600 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Build a field water monitor.

How to build it

  1. Seal the electronics
  2. Read four sensors
  3. Compensate by temperature
  4. Send data over LoRa
  5. Calibrate monthly

Related projects

Common questions

What parts do I need for the water quality buoy?

Heltec WiFi LoRa 32 V3, pH sensor kit (analog), TDS sensor module, Turbidity sensor module, DS18B20 waterproof probe, Solar panel 6 V 1 W and CN3065 solar Li-ion charger module.

How long does the water quality buoy take to build?

About 600 minutes for a advanced maker.