IR thermal camera AMG8833
8 × 8 thermal sensor that shows a low-resolution heat image.
MeasuresTemperature on an 8 × 8 grid
Range0 to 80 °C
Accuracy±2.5 °C
InterfaceI2C
SensorsReviewedMPN AMG8833Used in 5 projects
In short
What is the IR thermal camera AMG8833 and what is it used for?
8 × 8 thermal sensor that shows a low-resolution heat image. Makers use it for people detection, heat maps.
How it works
An array of 64 thermopiles, each reading the infrared from one zone.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Temperature on an 8 × 8 grid |
| Range | 0 to 80 °C |
| Accuracy | ±2.5 °C |
| Interface | I2C |
| I2C address | 0x68 or 0x69 |
| Supply voltage | 3.3 V |
Pinout
VIN3.3 to 5 V on modules
GNDGround
SCLI2C clock
SDAI2C data
INTInterrupt
How to use it
Use the Adafruit AMG88xx library and display the 8 × 8 grid, interpolated, on a TFT. It detects people and hot spots up to a few metres away.
Applications
People detectionheat maps
Builds that use it
Alternatives
- MLX90640 thermal camera32 × 24 pixels for real thermal images
- MLX90614 infrared thermometerSingle spot
Common questions
What is the IR thermal camera AMG8833 used for?
In maker projects: people detection, heat maps.
How does the IR thermal camera AMG8833 work?
An array of 64 thermopiles, each reading the infrared from one zone.
What voltage does the IR thermal camera AMG8833 need?
3.3 V.
How do I connect the IR thermal camera AMG8833 to an Arduino or ESP32?
I2C. Pins: VIN (3.3 to 5 V on modules), GND (Ground), SCL (I2C clock), SDA (I2C data), INT (Interrupt).
What can I use instead of the IR thermal camera AMG8833?
MLX90640 thermal camera and MLX90614 infrared thermometer.
