MLX90640 thermal camera
32 × 24 thermal sensor for simple thermal imaging.
MeasuresTemperature on a 32 × 24 grid
Range−40 to 300 °C
InterfaceI2C
I2C address0x33
SensorsReviewedMPN MLX90640ESF-BAAUsed in 3 projects
In short
What is the MLX90640 thermal camera and what is it used for?
32 × 24 thermal sensor for simple thermal imaging. Makers use it for DIY thermal cameras.
How it works
768 thermopile pixels read through an internal ADC with calibration data in on-chip memory.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Temperature on a 32 × 24 grid |
| Range | −40 to 300 °C |
| Interface | I2C |
| I2C address | 0x33 |
| Supply voltage | 3.3 V |
Pinout
VIN3.3 to 5 V on modules
GNDGround
SCLI2C clock
SDAI2C data
How to use it
Needs a microcontroller with plenty of RAM (ESP32 or better) and a fast I2C bus (400 kHz to 1 MHz). Use the Adafruit MLX90640 library.
Applications
DIY thermal cameras
Builds that use it
Alternatives
- IR thermal camera AMG8833Cheaper, 64 pixels
Common questions
What is the MLX90640 thermal camera used for?
In maker projects: DIY thermal cameras.
How does the MLX90640 thermal camera work?
768 thermopile pixels read through an internal ADC with calibration data in on-chip memory.
What voltage does the MLX90640 thermal camera need?
3.3 V.
How do I connect the MLX90640 thermal camera to an Arduino or ESP32?
I2C. Pins: VIN (3.3 to 5 V on modules), GND (Ground), SCL (I2C clock), SDA (I2C data).
What can I use instead of the MLX90640 thermal camera?
IR thermal camera AMG8833.
