Idea
In short
How do you build a pico 8x8 thermal grid viewer?
A Pico reads the 64 pixels of an AMG8833 infrared thermal sensor and shows them as a shaded 8 by 8 grid on an OLED, with hottest and coldest values. Indicative only; not a medical or fever-screening device. You need Raspberry Pi Pico H, IR thermal camera AMG8833, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 190 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
See heat patterns as a coarse image.
Parts list
- Development Boards
- Sensors
- Displays
- Prototyping
How to build it
- Wire the sensor on I2C
- Read the 64 temperatures
- Find the hottest and coldest pixel
- Map temperatures to dither levels
- Draw the grid on the OLED
Common questions
What parts do I need for the pico 8x8 thermal grid viewer?
Raspberry Pi Pico H, IR thermal camera AMG8833, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the pico 8x8 thermal grid viewer take to build?
About 190 minutes for a advanced maker.
