Idea
In short
How do you build an e-scooter charging fire guard?
A thermal camera sensor and smoke sensor watch an e-scooter battery while it charges and cut the charger's power if it overheats. You need ESP32 DevKit V1, IR thermal camera AMG8833, MQ-2 gas and smoke sensor module, Relay Module 5V, Active buzzer 5 V and ABS project box (100 × 60 × 25 mm).
- Level
- Advanced
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use a low-resolution thermal sensor to find hot spots and cut power safely.
Parts list
- Development Boards
- Sensors
- Sensors
- Interfaces
- Motors & Actuators
- Mechanical & Hardware
How to build it
- Mount the AMG8833 above the battery
- Read the 8x8 temperature grid every second
- Cut the charger relay if any pixel goes above 60 °C or smoke rises
- Sound the alarm
- A qualified electrician wires the mains relay
Common questions
What parts do I need for the e-scooter charging fire guard?
ESP32 DevKit V1, IR thermal camera AMG8833, MQ-2 gas and smoke sensor module, Relay Module 5V, Active buzzer 5 V and ABS project box (100 × 60 × 25 mm).
How long does the e-scooter charging fire guard take to build?
About 240 minutes for a advanced maker.
