MLX90614 infrared thermometer
Non-contact thermometer that reads the temperature of what it points at.
What is the MLX90614 infrared thermometer and what is it used for?
Non-contact thermometer that reads the temperature of what it points at. Makers use it for contactless temperature checks.
A thermopile absorbs infrared from the object and produces a small voltage related to its temperature.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Object and ambient temperature |
| Range | −70 to 380 °C object |
| Accuracy | ±0.5 °C around room temperature |
| Interface | SMBus / I2C |
| I2C address | 0x5A |
| Supply voltage | 3.3 V or 5 V by version |
Pinout
How to use it
Use the Adafruit MLX90614 library at address 0x5A. It measures the average temperature over its field of view (about 90° for the common version), so get close to small objects. Shiny metal reads low because it reflects rather than emits infrared.
Applications
Builds that use it
Alternatives
- IR thermal camera AMG8833An 8 × 8 grid instead of one spot
- DS18B20 waterproof probeContact measurement for liquids
Common questions
What is the MLX90614 infrared thermometer used for?
In maker projects: contactless temperature checks.
How does the MLX90614 infrared thermometer work?
A thermopile absorbs infrared from the object and produces a small voltage related to its temperature.
What voltage does the MLX90614 infrared thermometer need?
3.3 V or 5 V by version.
How do I connect the MLX90614 infrared thermometer to an Arduino or ESP32?
SMBus / I2C. Pins: VIN (3.3 V or 5 V depending on version), GND (Ground), SCL (I2C clock), SDA (I2C data).
What can I use instead of the MLX90614 infrared thermometer?
IR thermal camera AMG8833 and DS18B20 waterproof probe.
