Idea
In short
How do you build a heat leak finder for windows?
An 8x8 infrared thermal array scans a window frame and shows where cold air leaks in as blue patches on a small screen. You need ESP32 DevKit V1, IR thermal camera AMG8833, 1.8 inch TFT (ST7735, SPI), 18650 cell 2600 mAh (branded) and Battery holder 18650 single.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Display a low-resolution thermal image and interpret it.
Parts list
- Development Boards
- Sensors
- Displays
- Batteries
- Power
How to build it
- Wire the AMG8833 on I2C
- Read the 64 temperatures
- Interpolate to a smoother picture
- Colour-map the values
- Compare a sealed window with a leaky one
Common questions
What parts do I need for the heat leak finder for windows?
ESP32 DevKit V1, IR thermal camera AMG8833, 1.8 inch TFT (ST7735, SPI), 18650 cell 2600 mAh (branded) and Battery holder 18650 single.
How long does the heat leak finder for windows take to build?
About 150 minutes for a intermediate maker.
