Projects / Ideas / Warm object heat map

Warm object heat map

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build a warm object heat map?

An eight-by-eight thermal sensor shows a coloured grid of warm and cool areas on a small screen. You need ESP32 DevKit V1, IR thermal camera AMG8833, 1.8 inch TFT (ST7735, SPI) and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 300 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Visualise low-resolution thermal data.

How to build it

  1. Read the 64 pixels
  2. Map temperature to colour
  3. Draw the grid
  4. Interpolate for smoothness
  5. Mark the hottest cell

Related projects

Common questions

What parts do I need for the warm object heat map?

ESP32 DevKit V1, IR thermal camera AMG8833, 1.8 inch TFT (ST7735, SPI) and Breadboard 830 Tie Points.

How long does the warm object heat map take to build?

About 300 minutes for a intermediate maker.