Idea
In short
How do you build a heat grid display?
An eight by eight thermal sensor shows warm and cold areas as coloured squares on a small screen. Use it for objects and rooms, not for health checks. You need Arduino Nano, IR thermal camera AMG8833, 1.8 inch TFT (ST7735, SPI) and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 300 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Show a thermal grid.
Parts list
- Development Boards
- Sensors
- Displays
- Prototyping
How to build it
- Wire the sensor
- Read the grid
- Map temperature to colour
- Draw the squares
- Mark the hottest cell
Common questions
What parts do I need for the heat grid display?
Arduino Nano, IR thermal camera AMG8833, 1.8 inch TFT (ST7735, SPI) and Breadboard 830 Tie Points.
How long does the heat grid display take to build?
About 300 minutes for a intermediate maker.
