Projects / Ideas / Window-cleaning robot model

Window-cleaning robot model

AdvancedRoboticsIdeaReviewed
In short

How do you build a window-cleaning robot model?

A fan holds a small robot to glass while two tracks move it, with edge sensors to stop at the frame. You need ESP32 DevKit V1, Brushless motor A2212 1000 KV, 30 A brushless ESC, TB6612FNG Motor Driver, N20 gear motor with encoder × 2, IR obstacle avoidance sensor module × 3 and Li-Po 2S 7.4 V 2200 mAh 25C (RC).

Level
Advanced
Time
About 600 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Combine suction, drive and edge sensing.

Parts list

How to build it

  1. Build a sealed suction chamber
  2. Run the fan at a safe level
  3. Drive with two tracks
  4. Stop at the frame
  5. Add a tether for safety

Related projects

Common questions

What parts do I need for the window-cleaning robot model?

ESP32 DevKit V1, Brushless motor A2212 1000 KV, 30 A brushless ESC, TB6612FNG Motor Driver, N20 gear motor with encoder × 2, IR obstacle avoidance sensor module × 3 and Li-Po 2S 7.4 V 2200 mAh 25C (RC).

How long does the window-cleaning robot model take to build?

About 600 minutes for a advanced maker.