Idea
In short
How do you build a single-axis PID tuning rig?
A balance beam with one motor and an IMU lets you tune PID safely before flying. You need ESP32 DevKit V1, MPU6050 IMU, Brushless motor A2212 1000 KV, 30 A brushless ESC, Drone propellers 1045 (pair) and Li-Po 3S 11.1 V 2200 mAh 30C (drone).
- Level
- Advanced
- Time
- About 480 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Learn flight control on a safe bench rig.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Motors & Actuators
- Motors & Actuators
- Batteries
How to build it
- Mount the motor on a pivoting beam
- Read beam angle
- Run PID to hold level
- Tune P, then D, then I
- Add a hard stop
Common questions
What parts do I need for the single-axis PID tuning rig?
ESP32 DevKit V1, MPU6050 IMU, Brushless motor A2212 1000 KV, 30 A brushless ESC, Drone propellers 1045 (pair) and Li-Po 3S 11.1 V 2200 mAh 30C (drone).
How long does the single-axis PID tuning rig take to build?
About 480 minutes for a advanced maker.
