1.8 inch TFT (ST7735, SPI)
Small colour TFT, often with a microSD slot.
TypeColour TFT LCD
Size1.8 inch
Resolution128 × 160
Driver ICST7735
DisplaysReviewedMPN ST7735 1.8Used in 8 projects
In short
What is the 1.8 inch TFT (ST7735, SPI) and what is it used for?
Small colour TFT, often with a microSD slot. Makers use it for colour readouts, small games.
How it works
An ST7735 controller drives a 128 × 160 colour TFT with its own frame memory.
Key specifications
| Display spec | Value |
|---|---|
| Type | Colour TFT LCD |
| Size | 1.8 inch |
| Resolution | 128 × 160 |
| Driver IC | ST7735 |
| Interface | SPI |
| Supply voltage | 3.3 V logic (5 V on some modules) |
Pinout
VCC3.3 to 5 V (regulator on most boards)
GNDGround
CSChip select
RESETReset
A0Data or command (DC)
SDASPI data (MOSI)
SCKSPI clock
LEDBacklight
How to use it
Use Adafruit_ST7735 and try INITR_BLACKTAB, then GREENTAB or REDTAB if colours or edges look wrong. Use 3.3 V logic or series resistors from a 5 V board.
Applications
Colour readoutssmall games
Builds that use it
Alternatives
- 1.54 inch TFT (ST7789, 240x240)Sharper IPS screen
- ILI9341 TFT ModuleLarger 2.4 to 2.8 inch screen
Common questions
What is the 1.8 inch TFT (ST7735, SPI) used for?
In maker projects: colour readouts, small games.
How does the 1.8 inch TFT (ST7735, SPI) work?
An ST7735 controller drives a 128 × 160 colour TFT with its own frame memory.
What voltage does the 1.8 inch TFT (ST7735, SPI) need?
3.3 V logic (5 V on some modules).
How do I connect the 1.8 inch TFT (ST7735, SPI) to an Arduino or ESP32?
SPI. Pins: VCC (3.3 to 5 V (regulator on most boards)), GND (Ground), CS (Chip select), RESET (Reset), A0 (Data or command (DC)), SDA (SPI data (MOSI)).
What can I use instead of the 1.8 inch TFT (ST7735, SPI)?
1.54 inch TFT (ST7789, 240x240) and ILI9341 TFT Module.
