Components / Displays / ILI9341 TFT Module

ILI9341 TFT Module

Color TFT display-controller family with module-specific interfaces.

TypeColour TFT LCD
Size2.4 to 2.8 inch
Resolution240 × 320 pixels, 262K colours
Driver ICILI9341
DisplaysReviewedMPN ILI9341 2.8" SPI moduleUsed in 4 projects
23.4°CILI9341
In short

What is the ILI9341 TFT Module and what is it used for?

Color TFT display-controller family with module-specific interfaces. Makers use it for draw sensor values on screen.

In the real world

Graphical embedded displays

How it works

Displays present information; controllers, pinouts, interfaces and voltage levels vary by module.

Key specifications

Display specValue
TypeColour TFT LCD
Size2.4 to 2.8 inch
Resolution240 × 320 pixels, 262K colours
Driver ICILI9341
InterfaceSPI (up to about 40 MHz on ESP32)
Supply voltage3.3 V logic; VCC 3.3 or 5 V depending on module

Pinout

VCC / GNDPower
CSChip select
RESETReset
DCData/command select
MOSI / SCKSPI data and clock
LEDBacklight, to 3.3 V
MISOSPI read (optional)
T_*Touch controller pins on touch versions (XPT2046)

How to use it

Logic is 3.3 V: on an Uno use level shifting or series resistors. With ESP32, TFT_eSPI is fast; set the pins in its User_Setup.h.

#include <Adafruit_ILI9341.h>
Adafruit_ILI9341 tft(5, 2, 4); // CS, DC, RST
void setup() { tft.begin(); tft.fillScreen(ILI9341_BLACK); tft.setTextSize(2); tft.println("ElectroLark"); }
void loop() {}

Applications

Alternatives

Buy at

Common questions

What is the ILI9341 TFT Module used for?

In products: graphical embedded displays. In maker projects: draw sensor values on screen.

How does the ILI9341 TFT Module work?

Displays present information; controllers, pinouts, interfaces and voltage levels vary by module.

What voltage does the ILI9341 TFT Module need?

3.3 V logic; VCC 3.3 or 5 V depending on module.

How do I connect the ILI9341 TFT Module to an Arduino or ESP32?

SPI (up to about 40 MHz on ESP32). Pins: VCC / GND (Power), CS (Chip select), RESET (Reset), DC (Data/command select), MOSI / SCK (SPI data and clock), LED (Backlight, to 3.3 V).

What can I use instead of the ILI9341 TFT Module?

SSD1306 OLED Display.