Idea
In short
How do you build a pocket scope on a TFT?
A small screen draws a slow waveform from an analog pin with trigger and time per division. You need Arduino Nano, 1.8 inch TFT (ST7735, SPI), Potentiometer 10 kΩ, Tactile push button 6 mm × 2 and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 330 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a very simple low-speed scope.
Parts list
- Development Boards
- Displays
- Passives
- Switches
- Prototyping
How to build it
- Sample at a fixed rate
- Add a simple trigger
- Draw a grid
- Add a time-per-division button
- Measure the limits of the sample rate
Common questions
What parts do I need for the pocket scope on a TFT?
Arduino Nano, 1.8 inch TFT (ST7735, SPI), Potentiometer 10 kΩ, Tactile push button 6 mm × 2 and Breadboard 830 Tie Points.
How long does the pocket scope on a TFT take to build?
About 330 minutes for a advanced maker.
