Idea
In short
How do you build a slideshow photo frame?
Bitmap images stored on a micro SD card cycle on a colour TFT with a button to skip. You need Arduino Uno R3, 1.8 inch TFT (ST7735, SPI), MicroSD Card Module, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read BMP files and draw them on a TFT.
Parts list
- Development Boards
- Displays
- Interfaces
- Switches
- Prototyping
- Prototyping
How to build it
- Format an SD card and copy small BMPs
- Initialise the TFT
- Read a BMP header
- Draw it row by row
- Advance on a button press
Common questions
What parts do I need for the slideshow photo frame?
Arduino Uno R3, 1.8 inch TFT (ST7735, SPI), MicroSD Card Module, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the slideshow photo frame take to build?
About 210 minutes for a intermediate maker.
