Projects / Ideas / ESP32-S3 colour weather station

ESP32-S3 colour weather station

IntermediateDisplaysIdeaReviewed
In short

How do you build an ESP32-S3 colour weather station?

An ESP32-S3 reads a BME280 and draws temperature, humidity and pressure with a small history graph on a 1.8 inch colour TFT. You need ESP32-S3 DevKitC-1, BME280 Environmental Sensor, 1.8 inch TFT (ST7735, SPI) and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 170 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Show indoor weather on a colour screen.

How to build it

  1. Wire the sensor on I2C
  2. Wire the display over SPI
  3. Read the three values
  4. Draw labels and numbers
  5. Draw a rolling graph of the last hour

Related projects

Common questions

What parts do I need for the ESP32-S3 colour weather station?

ESP32-S3 DevKitC-1, BME280 Environmental Sensor, 1.8 inch TFT (ST7735, SPI) and Breadboard 830 Tie Points.

How long does the ESP32-S3 colour weather station take to build?

About 170 minutes for a intermediate maker.