Idea
In short
How do you build a weighing and batching system?
A load cell and pump fill containers to an exact weight, then stop and wait for the next. You need Arduino Nano, Load cell 5 kg (bar type), HX711 load cell amplifier, Peristaltic pump 12 V, MOSFET IRLZ44N, Rectifier Diode 1N4007, 16x2 LCD with I2C backpack (PCF8574), Tactile push button 6 mm and 12 V 2 A DC adapter.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control a process by weight.
Parts list
- Development Boards
- Sensors
- Sensors
- Motors & Actuators
- Semiconductors
- Semiconductors
- Displays
- Switches
- Power
How to build it
- Tare the empty container
- Run the pump fast then slow
- Stop at the target weight
- Show each batch
- Log totals
Common questions
What parts do I need for the weighing and batching system?
Arduino Nano, Load cell 5 kg (bar type), HX711 load cell amplifier, Peristaltic pump 12 V, MOSFET IRLZ44N, Rectifier Diode 1N4007, 16x2 LCD with I2C backpack (PCF8574), Tactile push button 6 mm and 12 V 2 A DC adapter.
How long does the weighing and batching system take to build?
About 180 minutes for a intermediate maker.
