Idea
In short
How do you build a conveyor belt counter and sorter?
A small conveyor counts parts with an IR sensor and pushes metal ones off with a solenoid. You need Arduino Nano, Johnson geared motor 300 RPM 12 V, DC motor speed controller (PWM, 10 A), IR obstacle avoidance sensor module, Push-pull solenoid 12 V, MOSFET IRLZ44N, Rectifier Diode 1N4007, 16x2 LCD with I2C backpack (PCF8574) and 12 V 2 A DC adapter.
- Level
- Intermediate
- Time
- About 360 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Combine motion, sensing and actuation on a line.
Parts list
- Development Boards
- Motors & Actuators
- Motor Drivers
- Sensors
- Motors & Actuators
- Semiconductors
- Semiconductors
- Displays
- Power
How to build it
- Build a belt with two rollers
- Run the motor at a set speed
- Count parts at the sensor
- Detect metal with an inductive probe or hall sensor
- Fire the solenoid at the right moment
Common questions
What parts do I need for the conveyor belt counter and sorter?
Arduino Nano, Johnson geared motor 300 RPM 12 V, DC motor speed controller (PWM, 10 A), IR obstacle avoidance sensor module, Push-pull solenoid 12 V, MOSFET IRLZ44N, Rectifier Diode 1N4007, 16x2 LCD with I2C backpack (PCF8574) and 12 V 2 A DC adapter.
How long does the conveyor belt counter and sorter take to build?
About 360 minutes for a intermediate maker.
