Projects / Ideas / Valve sequencer

Valve sequencer

IntermediateIndustrialIdeaReviewed
In short

How do you build a valve sequencer?

Four solenoid valves run in a timed sequence for a fountain, mixing or cleaning process. You need Arduino Nano, 12 V solenoid water valve × 4, Relay module 4-channel 5 V, 16x2 LCD with I2C backpack (PCF8574), Tactile push button 6 mm × 2 and 12 V 2 A DC adapter.

Level
Intermediate
Time
About 120 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Sequence outputs with timing and states.

How to build it

  1. Define steps with valve states and times
  2. Run through steps
  3. Pause and resume
  4. Show the current step
  5. Add a safe off state

Related projects

Common questions

What parts do I need for the valve sequencer?

Arduino Nano, 12 V solenoid water valve × 4, Relay module 4-channel 5 V, 16x2 LCD with I2C backpack (PCF8574), Tactile push button 6 mm × 2 and 12 V 2 A DC adapter.

How long does the valve sequencer take to build?

About 120 minutes for a intermediate maker.